On peut rajouter un autre port 10GbE pour 76$ pour avoir du dual 10Gbit, top
ODROID-H5 SBC – $250
H5 Case Type 1 – $11
LED Power Button – $5.99
15V/4A PSU (US plug) – $11
M.2 10GbE card – $76
16GB DDR5 SO-DIMM – $220
vraiment bien et pas cher
SoC – Allwinner A733
CPU
Dual-core Arm Cortex-A76 @ up to 2.00 GHz
Hexa-core Arm Cortex-A55 @ up to 1.79 GHz
Single-core RISC-V E902 real-time core up to 200 MHz
GPU – Imagination Technologies BXM-4-64 MC1 GPU with support for OpenGL ES 3.2, Vulkan 1.3, OpenCL 3.0
VPU
8Kp24 H.265/VP9/AVS2 decoding
4Kp30 H.265/H.264 encoding
AI accelerator – 3 TOPS NPU
System Memory – 1GB, 2GB, 4GB, 8GB, 12GB, or 16GB LPDDR5 at 4,800 MT/s
Storage
MicroSD card slot up to 128GB
Footprint for optional 8GB, 16GB, 32GB, 64GB, or 64GB eMMC flash module
Footprint for optional 32GB, 64GB, or 128GB 2-lane UFS 3.0 module
Video Output
Mini HDMI 2.0 port up to 4Kp60 resolution
4-lane MIPI DSI connector
USB-C port with DisplayPort Alt mode up to 4Kp60
Support for dual independent display setups
Camera interface – 2x 4-lane MIPI CSI connectors
Networking – Dual-band WiFi 6 and Bluetooth 5.4 module (Cdtech 20800D8-00) + IPEX antenna connector
USB
USB 3.1 OTG Type-C port with DisplayPort 1.4 Alt. mode
USB 2.0 Type-C power port
Expansion
40-pin color-coded GPIO header supporting GPIO, UART, I2C, SPI, and PWM.
PCIe Gen3 x1 FPC connector
Misc
Power and BOOT through holes
2-pin fan header
Power Supply – 5V/3A via USB-C connector
Dimensions – 65 x 32 mm
Weight – 14 grams
1GB RAM – $25
2GB RAM – $35
4GB RAM – $50
6GB RAM – $60
8GB RAM – $80
12GB RAM – $99.90
Cooling fan – $5.99
la taille d'un RPI (ou presque c'est quand même plus imposant
mais avec un assez bon CPU x86
l'Intel N100 Quad-Core (Atom)
70€ au format d'un RPI
avec un Soc x86 atom quad core
plutôt pas mal
SoC – Intel Processor N100 quad-core processor up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W
MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller with 264KB SRAM for I/O control
System Memory – 4GB or 8GB LPDDR5 (16GB optional, but not offered for sale yet)
Storage
M.2 M-Key socket for M.2 2230 NVMe (PCIe Gen 3.0 x4) SSD tested up to 3,400 MB/s (Read) and 3,100 MB/s (Write).
SPI flash for the BIOS/UEFI
eMMC flash footprint
Video Output – 2x micro HDMI 2.0 ports up to 4Kp60
Audio – 3.5mm headphone jack with microphone input
Networking
2.5GbE RJ45 port with PoE support through optional PoE HAT
WiFi 5 & BT 5 or WiFi 6 & BT 5.2
USB
3x USB 3.2 host ports (10 Gbps)
1x USB 2.0 host port (480 Mbps)
Expansion – 40-pin GPIO header with
Up to 2x SPI
Up to 2x UART
Up to 2x I2C
Up to 16x PWM
Up to 8x PIO(Programmable IO)
1 x 5V DC power in
2 x 3.3V power pin
Mostly compatible with the 40-pin Raspberry Pi GPIO header
Misc
Power Button
BOOTSEL Button for RP2040
Fan Header
RTC Header
BIOS features – Auto power on, Wake-on-LAN, RTC-timed wakeup, PXE boot
Power Supply
12V/2A (min) via USB Type-C port with PD support. 25W+ recommended when all USB 3.0 are used
12V via power input header
Dimensions – 85 x 56x 20mm
Temperature Range – 0°C to 60°C
enfin bon marché (100$)
les perfs sont quand même bien en dessous d'un Pi 4
Le Rockchip RK3588S est un quadruple coeur Cortex-A76 cadencé à 2.6 GHz associé à quatre cœurs Cortex-A55 à 1.8 GHz.
L’ensemble est associé à un circuit Mali-G610 MC4 pour la partie graphique ainsi qu’un circuit dédié aux calculs d’IA pouvant offrir jusqu’à 6 TOPS.
Une base associée à un montant assez rare de mémoire vive puisque la carte peut être livrée
avec 4 Go (69$),
8 Go (119$)
ou même 16 Go (159$) de LPDDR4X.
pas mal mais ça commence à faire cher
SoC – StarFive JH7100 Vision SoC with:
RISC-V U74 dual-core with 2MB L2 cache @ 1.5 GHz (équivalent à un Cortex A55 )
Vision DSP Tensilica-VP6 for computing vision
NVDLA Engine 1 core (configuration 2048 MACs @ 800MHz – 3.5 TOPS)
Neural Network Engine (1024MACs @ 500MHz – 1 TOPS)
VPU – H.264/H.265 decoder up to 4Kp60, dual-stream decoding up to 2Kp30
JPEG encoder/decoder
Audio Processing DSP and sub-system
System Memory – 4GB or 8GB LPDDR4
Storage – MicroSD card slot
Video output
1x HDMI port up to 1080p30
1x MIPI DSI interface up to 4Kp30
MIPI-CSI TX for video output after ISP and AI processing
Camera
Dual channels of ISP, each channel support up to 4K @ 30FPS
2 x MIPI-CSI Rx
Audio – 3.5mm audio jack
Connectivity – 1x Gigabit Ethernet, 2.4 GHz 802.11b/g/n WiFi 4, and Bluetooth 4.2
USB – 4x USB 3.0 Ports
Expansion – 40-pin GPIO header with 28 x GPIO, I2C, I2S, SPI, UART
Security – Support TRNG and OTP
Misc – Reset and power buttons
Power Supply – 5V/3A via USB Type-C port
Dimensions – TBD
SoC – Intel Celeron J4115 Gemini Lake Refresh quad-core processor @ 1.8 GHz / 2.5 GHz (turbo single thread) / 2.3Ghz (turbo multi-thread) with 12EU Intel UHD Graphics 600 up to 700 MHz; Noted listed on Ark Intel just yet, but it’s real.
System Memory – Dual-channel Memory DDR4-PC19200 (2400MT/s) supporting up to 32GB RAM in total
Storage – M.2 PCIe 2.0 x4 slot for one NVMe storage, 2x SATA 3.0 ports, eMMC flash support
Video Output
HDMI 2.0 up to 4K (4096×2160) @ 60 Hz
DisplayPort 1.2 up to 4K (4096×2160) @ 60 Hz
Audio – HDMI, audio jacks for HP, MIC. and S/PDIF
Connectivity – Dual 2.5 Gigabit Ethernet (RJ45) via RTL8125B chipset
Expansion – 24-pin header with I2C, UART (3.3V), USB2.0 and HDMI CEC signals
Misc – RTC battery (Included)
Power Supply – 14V to 20V DC power input
Dimensions – 110x110x43mm
Weight – About 320 grams with heatsink, two DRAM modules, and M.2 NVMe SSD.
ODROID-H2+ is up for pre-order for $119 on Hardkernel
c'est vraiment top pour un prix raisonnable !
SoC – Intel Atom x5-Z8300 “Cherry Trail” quad-core processor @ 1.44 GHz / 1.84 GHz (Turbo) with Intel Gen8 HD graphics @ 500 MHz
System Memory – 1 GB, 2 GB. or 4GB LPDDR3-1866
Storage – MicroSD card socket, eMMC flash socket
Video Output / Display I/F – HDMI 1.4 port up to 4K @ 30 Hz, eDP and MIPI DSI connectors
Audio I/O – Via HDMI, 3.5mm audio jack
Connectivity
Gigabit Ethernet
Model B only – 802.11 a/b/g/n/ac and Bluetooth 4.2 Classic + LE
USB – 1x USB 3.0 port, 3x USB 2.0 host ports, 1x USB OTG Type-C port
Camera I/F – MIPI CSI connector
Expansion – 40-pin Raspberry Pi compatible header with GPIOs, 2x ADC, 2x PWM, 2x I2C
Misc – RTC
Power Supply
5V-20V up to 3A/1A Via USB-C port with QC and PD fast charging support;
AXP288C PMIC
Model B only – optional PoE support via additional HAT
Dimensions – 85 x 52 mm
Rock Pi X model A – 1GB RAM ($39), 2GB ($49), or 4GB ($65)
Rock Pi X model B – 1GB RAM ($49), 2GB ($59), or 4GB ($75)
Here’s a reminder of the specifications:
SoC – Intel Atom x5-Z8350 quad core processor @ up to 1.92GHz with Intel HD graphics
System Memory – 2GB DDR3L-1600
Storage – 16GB eMMC flash, slot for SD expansion up to 256GB
Video Output – HDMI port
Connectivity
Gigabit Ethernet via Realtek RTL8111G transceiver
Dual band 802.11b/g/n WiFi 4 via RT5572 with IPX connectors on board
Bluetooth 4.0 via CSR8510
USB – USB 3.0 and USB 2.0 ports
Sensor – 9-axis inertial navigation sensor with compass (BNO055)
Expansion – JST style connectors and a 26-pin header for power & GPIO
Debugging – TTL serial debug and expansion serial ports up to 3.6Mbps
Misc – Real time clock & battery
Power Supply – 5V/4A recommended. 4-15 watts typ. power consumption
Dimensions – 130 x 100 x 50 mm
https://www.phoronix.com/scan.php?page=article&item=nvidia-jetson-nano&num=1
https://www.phoronix.com/scan.php?page=article&item=nvidia-jetson-jetbot&num=1
https://www.minimachines.net/actu/jetson-nano-76909/comment-page-1
Jetson Nano CPU Module
128-core Maxwell GPU
Quad-core Arm A57 processor @ 1.43 GHz
System Memory – 4GB 64-bit LPDDR4 @ 25.6 GB/s
Storage – microSD card slot (devkit) or 16GB eMMC flash (production)
Video Encode – 4K @ 30 | 4x 1080p @ 30 | 9x 720p @ 30 (H.264/H.265)
Video Decode – 4K @ 60 | 2x 4K @ 30 | 8x 1080p @ 30 | 18x 720p @ 30 (H.264/H.265)
Dimensions – 70 x 45 mm
Baseboard
260-pin SO-DIMM connector for Jetson Nano module.
Video Output – HDMI 2.0 and eDP 1.4 (video only)
Connectivity – Gigabit Ethernet (RJ45) + 4-pin PoE header
USB – 4x USB 3.0 ports, 1x USB 2.0 Micro-B port for power or device mode
Camera I/F – 1x MIPI CSI-2 DPHY lanes compatible with Leopard Imaging LI-IMX219-MIPI-FF-NANO camera module and Raspberry Pi Camera Module V2
Expansion
M.2 Key E socket (PCIe x1, USB 2.0, UART, I2S, and I2C) for wireless networking cards
40-pin expansion header with GPIO, I2C, I2S, SPI, UART signals
8-pin button header with system power, reset, and force recovery related signals
Misc – Power LED, 4-pin fan header
Power Supply – 5V/4A via power barrel or 5V/2A via micro USB port; optional PoE support
Dimensions – 100 x 80 x 29 mm
très détaillé sur le site NVIDIA :
https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%2520Linux%2520Driver%2520Package%2520Development%2520Guide%2Fsoftware_features_jetson_nano.html
je vais le prendre ! je pense
https://www.minimachines.net/actu/odroid-n2-amlogic-s922x-76031
SoC – Amlogic S922X hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 1.8 GHz, 2x Arm Cortex A53 cores @ 1.9 GHz, Arm Mali-G52 GPU @ 846MHz; 12nm manufacturing process
System Memory – 2GB or 4GB DDR4 RAM @ 1320 MHz
Storage – 8MB SPI flash, eMMC flash module socket, micro SD card slot
Video & Audio Output – HDMI up to 4K @ 75 Hz, AV port (composite video + stereo audio)
USB – 4x USB 3.0 ports, 1x micro USB 2.0 OTG port
Expansions – 40-pin GPIO header with 2x I2C, UART, 6x PWM, SPI, S/PDIF, 2x ADC, and GPIOs
Misc – 2x system LEDs, SPI/eMMC boot select switch, IR receiver, 2-pin header for RTC battery, 2-pin header for optional fan
Debugging – 1x UART header for serial console
Power Supply – DC power barrel jack
Power consumption – Idle: 1.6~1.8 Watt; Heavy load: 5.2~5.3 Watt (stress-ng –cpu 6 –cpu-method matrixprod)
Dimensions – 90 x 90 mm (TBC)pas mal
énormément plus perf que le pi 3
un peu plus perf que RK3699
SoC – Intel Atom x5-Z8350 quad core processor @ up to 1.92GHz with Intel HD graphics
System Memory – 2GB DDR3L-1600
Storage – 16GB eMMC flash, slot for SD expansion up to 256GB
Video Output – HDMI port
Connectivity
Gigabit Ethernet via Realtek RTL8111G transceiver
Dual band 802.11b/g/n/ac WiFi 5 via RT5572 with IPX connectors on board
Bluetooth 4.0 via CSR8510
USB – USB 3.0 and USB 2.0 ports
Sensor – 9-axis inertial navigation sensor with compass (BNO055)
Expansion – JST style connectors and a 26-pin header for power & GPIO
Debugging – TTL serial debug and expansion serial ports up to 3.6Mbps
Misc – Real time clock & battery
Power Supply – 5V/4A recommended. 4-15 watts typ. power consumption
Dimensions – 130 x 100 x 50 mm
This looks too good to be true, but that’s intriguing so let’s have closer look.
http://wiki.radxa.com/Rockpi4/getting_started#
https://www.cnx-software.com/2018/11/08/rock-pi-4-raspberry-pi-rk3399-board/
SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 1.8 GHz, 4x Cortex-A53 @ up to 1.4 GHz, a Mali-T864 GPU with support OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and a VPU with 4K VP9 and 4K 10-bit H265/H264 decoding
System Memory – 1, 2 or 4GB LPDDR4 @ 3200 Mbps
Storage – eMMC module socket, micro SD card slot up to 128GB, M.2 NVME SSD socket
Video Output / Display Interface
HDMI 2.0a up to 4K @ 60 Hz
2-lane MIPI DSI via FPC connector
Dual independent display support
Audio – Via HDMI and 3.5mm audio jack; HD codec supporting up to 24-bit/96Khz audio
Camera – MIPI-CSI2 connector for camera up to 8MP
Connectivity
Rock Pi 4A – Gigabit Ethernet
Rock Pi 4B – Gigabit Ethernet with PoE support (additional HAT required), 802.11ac WiFi 5, Bluetooth 5.0 with on-board antenna
USB – 1x USB 3.0 host port, 1x USB 3.0 OTG port, 2x USB 2.0 host ports
Expansion – 40-pin expansion header with 1x UART, 2x SPI bus, 2x I2C bus, 1x PCM/I2S, 1x SPDIF, 1x PWM, 1x ADC, 6x GPIO, and power signals (5V, 3.3V and GND)
Misc – RTC
Power Supply – Via USB-C port supporting USB PD 2.0 (9V/2A, 12V/2A, 15V/2A, or 20V/2A) and Qualcomm Quick Charge 3.0/.0 (9V/2A, 12V/1.5A). It’s also possible to power the power via a 5V/3.4A power adapter, but it is not recommended
Dimensions – 85 x 54 mm
So the only real difference between model A and model B is the latter includes a wireless module, and optional support for PoE.
vraiment pas mal pour le prix (à partir de 39$)
La Frite has
four ARM Cortex-A53 64-bit cores, 512MB / 1GB DDR4 RAM, ARM Mali graphics,
two USB 2.0 ports (no USB3), and Ethernet.
The GPIO header arrangement is similar to the Raspberry Pi Model A+.
et 9€ en 1Go